Coal vermiculite is a solid waste in the process of mining and clean coal production. It is now used for power generation, production of cement, brick -making, production and chemical products, and improved soil. The coal gangue can be used for bricks after sand making. Pay attention to the equipment selected. The core device is the impact of the vertical axis, also known as the sand making machine. 0.5mm of finished sand can be adjusted by 0.5mm, and it is produced at 30-200 tons. The equipment can be selected as needed.
The processing of coal gangue is divided into three stages: rough crushing, counterattack crusher or cone crusher, and sand making plastic surgery of sand making machine. It -stage: Rough crushing The large coal gangue meal masonry warehouse is evenly fed by the vibration machine, transported to the jaw crusher for coarse crushing, and the coarse coal gangue meridian vibration sieve Later, the belt conveyor was transported to the counterattack crusher or cone crusher for medium crushing. The second stage: medium crushing sered coal gangsters that are transported to the counterattack/cone breakthrough after the medium crushing, use a round vibration sieve for screening, and the larger particles of coal gangsters are returned to the counterattack/cone breakthrough. Broken again. The third stage: sand making The crushed coal gangue into the sand making machine for further crushing plastic surgery. It stage: Packaging The packaged and stored finished coal gangsters after drying. This machining process process
Coal vermiculite can be broken and sand. In terms of sand making, the types of sand making machines that can be selected are: mobile sand making machine mobile sand making machines are mainly mobile impact breaks, divided into tires and crawlers mobile system There are two types of sand machines. Mobile sand making machines have the characteristics of large output, high efficiency, and low operation costs. There is no need to pile up installation, no transportation raw materials, one machine is equivalent to one factory, one person can control production, which is equivalent to saving about 5 yuan for each ton mechanism sand, which can increase monthly income of more than 10,000 yuan. double -class crusher The structure of double -class breaking is relatively simple, mainly consisting of two rotors and multiple hammer heads. The coal gangue is broken during the continuous throws. With low energy consumption, strong processing capacity, and good wear resistance of hammer head, the output is 10-180T/h. The small hammer crusher The structure of the small hammer is similar to half a double -class break. It also uses the principle of hitting crushing. Because of the design of the bars The granular type is adjusted, but the output is low, which is 3-55m3/h, which is more suitable for household treatment coal vermiculite. The shock broken sand machine Themaking the impeller of high -speed rotation can be used for shocking, which can realize the conversion of "stone stones" and "stone beating iron". Require. It has the characteristics of large production capacity and good granular type.
From the perspective of coal mining, China produces 100 million tons of coal each year, and about 14 million tons of vermiculite is emitted; from the perspective of coal washing, the amount of 100 million tons of coking coal discharge of 20 million tons is selected, and 100 million tons of power is washed every washed. Coal, 15 million tons of stones. In 2005, 104.5 billion tons of coal produced in various types of coal mines in China, 38.5 billion tons of coal washing, and emission of 19-2 billion tons. As a result, there are more than 1,500 Salon Mountains across the country with a stacking volume of more than 3 billion tons (accounting for more than 40%of the total industrial solid waste emissions in China). The total content of silicon dioxide, tritinal dioxide, and tritenuxide in coal gangue is more than 80%. Various buildings such as cement and clinker cement. Mana and sand making machines have been widely used in coal gangsters to make cement production lines. Whether it is used for bricks, or adding materials for cement or supplied to coal gangslite power plants, the generally used processing equipment include jaw crusher, counterattack crusher, Raymond grinding powder, ultra -pressure trapezoidal shape The grinding machine, vertical grinding machine, vibration sieve, vibration feeder, etc. The jaw crusher has the characteristics of large crushing ratio, uniform product size, simple structure, reliable work, simple maintenance, and economy. It is widely used in mine, cement, chemical, railway, and building aspects. The counterattack crusher (counterattack) can handle a variety of coarse, medium, fine materials (coal gangue, granite, limestone, concrete, etc.) with a side length of not more than 500mm and the pressure resistance of more than 350MPa. , Artificial sandstone, crushing and other industries. On -site survey, using terrain trend, reasonable configuration, compact equipment connection, small land area, increased yield and saving belt machine length and project investment. The product has the advantages of unique structure, key connection, high chromium hammer, unique counterattack lining plate; hard rock crushing, high efficiency energy saving; product shape is cube, the particle size of the discharge can be adjusted, and the crushing process is simplified. With the continuous deepening of the economic system reform and the healthy and rapid development of my country's industry and agriculture, in the case of increasing energy, mining machinery and equipment enterprises are increasingly paying attention to the research and development and production of high -efficiency, energy conservation and environmental protection equipment, and the use of long -term use in mining machinery manufacturing. At the same time as the design principles of life, low energy consumption and weight loss, mining machinery and equipment companies have also begun to pay more and more attention to secondary development and utilization resources. The coal as the main energy of my country, it plays an extremely important role in socio -economic development. The development and utilization of coal not only plays a huge role in promoting the socioeconomic economy, but also has a significant impact on the environment. Coal gangsters and coal seams are the main wastes produced during the development of coal. They have long been regarded as harmful substances and disaster gases by the coal industry for a long time. Coal vermiculite is a solid waste excreted during the excavation, mining and washing process of coal. China has accumulated more than 1 billion tons of coal vermiculite, and 100 million tons of coal gangsters will be discharged every year. In recent years, coal vermiculite has been regarded as the largest number of industrial solid waste, and as a resource, it has been widely used in the fields of chemical industry, building materials, metallurgy, light industry and other fields. Hua has become the focus of comprehensive use of coal gangsters. The new type of coal gangue crusher replaces the crusher of the early single -stage sieve to perfectly solve the problem of crushing difficulties in high humidity materials. Coal gangsters crushed machines are the most effective investment for individual users and small and medium -sized enterprises. The cost of the device. The equipment has a low noise and small fineness, and the whole set of equipment is convenient for maintenance without special installation. The coal gangue crusher uses dual -rotor upper and lower grades to crushes; there is no screen at the bottom, there is no strict requirements for the moisture content of the material, there is no problem of a pads and a sieve plate. Therefore, the crushing efficiency is high, and there is no ineffective wear of the hammer head; the high alloy wear -resistant hammer head; the hammer head does not need to be repaired after wearing, the movement position is repeatedly used, and a hammer head can be used for three pair of hammer heads. Only one person can be easily opened and closed, not only light, fast, safe and reliable, easy to maintain, and the overall structure is reasonable and simple.
Can coal vermiculite make sand? What is different from ordinary mountain stone sand? The coal vermiculite is a low -carbon -containing amount of carbon -containing in coal mining or coal washing. At present, many friends in the sand and gravel industries choose to use coal gangsters as raw materials for sand making, and How to configure coal gangue sand production lines? What is different from ordinary mountain stone sand? The coal gangue sand mainly includes three steps: crushed, fine crushing and plastic sand making. This crushing: The large coal gangsters in the material warehouse are evenly fed to the feed machine by vibrating, and sent to the Hubei crusher for coarse crushing. Divided, then section from the belt conveyor to the next step. This: Themaker was transported to a counterattack crusher/cone crusher for medium fragmentation through rough coal gangsters, and then a round vibration sieve was used for screening. The crusher/cone crusher is broken again, which meets the size of the sand making machine to send it to the sand making machine. S sand making plastic surgery: This will be sent to the sand -making machine after the second section of the crushed coal gangue passing the conveyor belt. The coal gangue after plastic surgery was sent to the sand washing machine for cleaning. Strophic sand made by coal gangsters and the sand made of ordinary mountain stones may be that the quality of sand is different, not to say which quality is higher, but the application field of finished sandstone aggregate is different. Do not say that coal -to -stone sand is different from ordinary mountain stone sand. Even if it is the same as cobblestone, the quality of the cobblestone characteristics, the configuration of the production line, and the different processing of the processing of the finished sandy sandy device may be different.
Coal vermiculite is a solid waste in the process of mining and clean coal production. It is now used for power generation, production of cement, brick -making, production and chemical products, and improved soil.
The coal gangue can be used for bricks after sand making. Pay attention to the equipment selected. The core device is the impact of the vertical axis, also known as the sand making machine. 0.5mm of finished sand can be adjusted by 0.5mm, and it is produced at 30-200 tons. The equipment can be selected as needed.
The processing of coal gangue is divided into three stages: rough crushing, counterattack crusher or cone crusher, and sand making plastic surgery of sand making machine.
It -stage: Rough crushing
The large coal gangue meal masonry warehouse is evenly fed by the vibration machine, transported to the jaw crusher for coarse crushing, and the coarse coal gangue meridian vibration sieve Later, the belt conveyor was transported to the counterattack crusher or cone crusher for medium crushing.
The second stage: medium crushing
sered coal gangsters that are transported to the counterattack/cone breakthrough after the medium crushing, use a round vibration sieve for screening, and the larger particles of coal gangsters are returned to the counterattack/cone breakthrough. Broken again.
The third stage: sand making
The crushed coal gangue into the sand making machine for further crushing plastic surgery.
It stage: Packaging
The packaged and stored finished coal gangsters after drying.
This machining process process
Coal vermiculite can be broken and sand.
In terms of sand making, the types of sand making machines that can be selected are:
mobile sand making machine
mobile sand making machines are mainly mobile impact breaks, divided into tires and crawlers mobile system There are two types of sand machines. Mobile sand making machines have the characteristics of large output, high efficiency, and low operation costs. There is no need to pile up installation, no transportation raw materials, one machine is equivalent to one factory, one person can control production, which is equivalent to saving about 5 yuan for each ton mechanism sand, which can increase monthly income of more than 10,000 yuan.
double -class crusher
The structure of double -class breaking is relatively simple, mainly consisting of two rotors and multiple hammer heads. The coal gangue is broken during the continuous throws. With low energy consumption, strong processing capacity, and good wear resistance of hammer head, the output is 10-180T/h.
The small hammer crusher
The structure of the small hammer is similar to half a double -class break. It also uses the principle of hitting crushing. Because of the design of the bars The granular type is adjusted, but the output is low, which is 3-55m3/h, which is more suitable for household treatment coal vermiculite.
The shock broken sand machine
Themaking the impeller of high -speed rotation can be used for shocking, which can realize the conversion of "stone stones" and "stone beating iron". Require. It has the characteristics of large production capacity and good granular type.
From the perspective of coal mining, China produces 100 million tons of coal each year, and about 14 million tons of vermiculite is emitted; from the perspective of coal washing, the amount of 100 million tons of coking coal discharge of 20 million tons is selected, and 100 million tons of power is washed every washed. Coal, 15 million tons of stones. In 2005, 104.5 billion tons of coal produced in various types of coal mines in China, 38.5 billion tons of coal washing, and emission of 19-2 billion tons. As a result, there are more than 1,500 Salon Mountains across the country with a stacking volume of more than 3 billion tons (accounting for more than 40%of the total industrial solid waste emissions in China).
The total content of silicon dioxide, tritinal dioxide, and tritenuxide in coal gangue is more than 80%. Various buildings such as cement and clinker cement.
Mana and sand making machines have been widely used in coal gangsters to make cement production lines. Whether it is used for bricks, or adding materials for cement or supplied to coal gangslite power plants, the generally used processing equipment include jaw crusher, counterattack crusher, Raymond grinding powder, ultra -pressure trapezoidal shape The grinding machine, vertical grinding machine, vibration sieve, vibration feeder, etc. The jaw crusher has the characteristics of large crushing ratio, uniform product size, simple structure, reliable work, simple maintenance, and economy. It is widely used in mine, cement, chemical, railway, and building aspects. The counterattack crusher (counterattack) can handle a variety of coarse, medium, fine materials (coal gangue, granite, limestone, concrete, etc.) with a side length of not more than 500mm and the pressure resistance of more than 350MPa. , Artificial sandstone, crushing and other industries. On -site survey, using terrain trend, reasonable configuration, compact equipment connection, small land area, increased yield and saving belt machine length and project investment. The product has the advantages of unique structure, key connection, high chromium hammer, unique counterattack lining plate; hard rock crushing, high efficiency energy saving; product shape is cube, the particle size of the discharge can be adjusted, and the crushing process is simplified. With the continuous deepening of the economic system reform and the healthy and rapid development of my country's industry and agriculture, in the case of increasing energy, mining machinery and equipment enterprises are increasingly paying attention to the research and development and production of high -efficiency, energy conservation and environmental protection equipment, and the use of long -term use in mining machinery manufacturing. At the same time as the design principles of life, low energy consumption and weight loss, mining machinery and equipment companies have also begun to pay more and more attention to secondary development and utilization resources.
The coal as the main energy of my country, it plays an extremely important role in socio -economic development. The development and utilization of coal not only plays a huge role in promoting the socioeconomic economy, but also has a significant impact on the environment. Coal gangsters and coal seams are the main wastes produced during the development of coal. They have long been regarded as harmful substances and disaster gases by the coal industry for a long time. Coal vermiculite is a solid waste excreted during the excavation, mining and washing process of coal. China has accumulated more than 1 billion tons of coal vermiculite, and 100 million tons of coal gangsters will be discharged every year. In recent years, coal vermiculite has been regarded as the largest number of industrial solid waste, and as a resource, it has been widely used in the fields of chemical industry, building materials, metallurgy, light industry and other fields. Hua has become the focus of comprehensive use of coal gangsters. The new type of coal gangue crusher replaces the crusher of the early single -stage sieve to perfectly solve the problem of crushing difficulties in high humidity materials. Coal gangsters crushed machines are the most effective investment for individual users and small and medium -sized enterprises. The cost of the device. The equipment has a low noise and small fineness, and the whole set of equipment is convenient for maintenance without special installation. The coal gangue crusher uses dual -rotor upper and lower grades to crushes; there is no screen at the bottom, there is no strict requirements for the moisture content of the material, there is no problem of a pads and a sieve plate. Therefore, the crushing efficiency is high, and there is no ineffective wear of the hammer head; the high alloy wear -resistant hammer head; the hammer head does not need to be repaired after wearing, the movement position is repeatedly used, and a hammer head can be used for three pair of hammer heads. Only one person can be easily opened and closed, not only light, fast, safe and reliable, easy to maintain, and the overall structure is reasonable and simple.
Can coal vermiculite make sand? What is different from ordinary mountain stone sand?
The coal vermiculite is a low -carbon -containing amount of carbon -containing in coal mining or coal washing. At present, many friends in the sand and gravel industries choose to use coal gangsters as raw materials for sand making, and How to configure coal gangue sand production lines? What is different from ordinary mountain stone sand?
The coal gangue sand mainly includes three steps: crushed, fine crushing and plastic sand making.
This crushing:
The large coal gangsters in the material warehouse are evenly fed to the feed machine by vibrating, and sent to the Hubei crusher for coarse crushing. Divided, then section from the belt conveyor to the next step.
This:
Themaker was transported to a counterattack crusher/cone crusher for medium fragmentation through rough coal gangsters, and then a round vibration sieve was used for screening. The crusher/cone crusher is broken again, which meets the size of the sand making machine to send it to the sand making machine.
S sand making plastic surgery:
This will be sent to the sand -making machine after the second section of the crushed coal gangue passing the conveyor belt. The coal gangue after plastic surgery was sent to the sand washing machine for cleaning.
Strophic sand made by coal gangsters and the sand made of ordinary mountain stones may be that the quality of sand is different, not to say which quality is higher, but the application field of finished sandstone aggregate is different. Do not say that coal -to -stone sand is different from ordinary mountain stone sand. Even if it is the same as cobblestone, the quality of the cobblestone characteristics, the configuration of the production line, and the different processing of the processing of the finished sandy sandy device may be different.