Ready to install the Win7 system, but it is online. No light drive. Which master teaches me how I use the detailed steps of the U disk, thank you very much. Essence Essence Leave your QQ. Essence Essence
5 thoughts on “Win7 detailed installation steps?”
Leave a Comment
You must be logged in to post a comment.
The following is a copy of my copy, but I think it is a good installation tutorial. It is recommended to use the last method, the simplest and not other things. Various solutions of the Microsoft system:
1, hard disk installation method: (might be installed in specific conditions) hard disk installation method can be divided into two types: 1. The simplest hard disk installation method: decompress the system ISO file to other partitions, and Run the setup.exe file in the decompression directory, follow the corresponding steps, and will not be detailed. This method limits the installation method of the same simulation optical drive as the disadvantage. It is also impossible to format the old system and 32/64 different systems cannot be mixed. It is recommended for multi -system installation. 2. Classic hard disk installation method: (Similar to PE guidance principles) Brief description: The installation is relatively troublesome, the installation speed is fast, and it can achieve clean installation. The difference from Method 1 is that it will not leave the old system files, but the same 32 32 /64 -bit different systems cannot be mixed. Methods: Unzip the system reflects ISO file to other partitions, and divided into installation of systems below XP according to different old systems and installation of systems above vista. 1. Installation of XP and below systems, copy the file below to the files below to C drive root directory: Bootmgr, BOOT, EFI folder, boot.wim under Sources (placed in the Sourcess directory of C drive), run the following command: C: C: C : OOT OOTSECT.EXE /NT60 C: Restart the computer to guide the Win7 computer repair mode,
select the DOS prompt, delete all files under the C drive, delete the original Bootmgr file and BOOT, EFI that the original copy to C drive , Sourcess folder, so as not to install the files when installing Win7, causing failure. Type the command in the command line window and return to the car: Del C: Bootmgr
rd /s C: Boot
rd /s C: EFI
RD /S C: Sources n setup in the installation directory for Install. 2. Installation of system above VISTA, there is no need to copy the above files, restart directly into the computer repair mode, select DOS prompts, delete all files under the C drive, and run the setup in the installation directory for installation. 3 Hard disk WINPE Installation is trying to install Win7 today under PE, but it is prompted that the operating system version is too low. The following is a solution. 1. Decade the ISO image of Windows7 (or withdrawn with virtual optical drive software) to any folder of any non -system disk, such as: d: win7
2. Enter PE, format the C drive as it is to form the C drive as it is to form the C drive. NTFS, preferably PE
3. Extract Boot and BOOTMGR from D: Win7 to the root directory of BOOT and BOOTMGR to C drive The two files of .wim and Install.wim to C: Sources
4. Run CMD in PE, enter the following line to return to the car "C: OOT OOTSECT.EXE /NT60 C:" No quotes, disk dish, disk The rune may not be C, then resume the computer
5. The installation interface appears, do not click on the installation now, click the "repairing computer" in the lower left corner to enter the system recovery option (better recognition in Chinese version), select the last "Command "Prompt", enter the DOS window
6. After entering the DOS, enter d: win7sourceSsetup.exe, Enter, the following is the same as the installation of the system, enter the normal installation of the system,
7. When selecting the installation location Remember to format C drive again
Disadvantages: 1, 32/64 bits of different systems cannot be mixed, because different bits of Setup and Bootsect programs cannot run in different levels. 2. The abnormal interruption of the installation process will cause the system to be unable to guide. So there must be a spare emergency disk.
2, CD -ROM installation method: Brief description: CD installation method can be regarded as the most classic, the best compatibility, and the simplest and easy -to -learn installation method. It can be upgraded and installed, or it can be newly installed (you can choose to format the old system partition when installing), and the installation method is flexible. Without the restrictions of the old system, it can be flexibly installed with 32/64 -bit systems. Methods: 1. Download the ISO file of the installation disk of the relevant system, and use it for later use. (This step can be omitted with a CD) 2. Putting on the BIOS (generally the Del or F2 or F1 key is made when the hardware self -inspection, different computers are set differently), set as a optical drive priority start. Save exit by F10. 3. Put it in the CD, restart the computer, and the CD -ROM guidance enters the installation interface. Install according to the corresponding options. When selecting the hard disk partition position, you can choose a blank partition or a existing partition, and formatting the partition. Others are no longer detailed. Disadvantages: In the case of WIN7 test version full of flying, this carving installation is undoubtedly the most luxurious, wasteful, and unwavering method. It is recommended that it is not recommended without any other installation methods. 3. Simulation Optical Drive Installation Method: (Under a certain situation, it may not be successful) Brief description: The installation method of the simulation optical drive is the simplest, the installation speed is fast, but the limit is more limited. It is recommended for multi -system installation. Methods: Under the existing system, use an analog optical drive program to load the system ISO file, run the installation program for analog optical drive, enter the installation interface, and there should be enough space for the C drive when upgrading. Multi -system installation is best to install the new system to a new blank partition. Disadvantages: 1. Because the existing system disk cannot be formatted during installation, the single system cannot be installed clean. Because the old system file occupies space, it is also a waste of disk space. There must be an old operation system. 2. Because the old system partition cannot be formatted, the residual virus files may endanger the security of the new system. 3. The old 32 -bit system cannot install 64 -bit systems, and the old 64 -bit system cannot install 32 -bit systems. 4. Outstanding disk installation method: (Never quantitatively mass -produced, highly recommended! The method is super simple) Brief description: The advantages of the U disk installation method are similar to the disclosure of the disc, but there is no need to engrav the disk. Compared with other installation methods, there are many benefits: 1. It is not affected by 32/64 systems. If 64 -bit Win7, or 64 -bit installation 32 -bit Win7 is installed under 32 old systems, you will definitely find that Setup cannot run, because 32 -bit systems cannot run 64 -bit programs. This method can solve various incompatible problems, and the installation speed is faster than the CD. 2. You can be a first aid disk: In the event of a system, the system cannot be started due to various reasons, then your premium disk is your first aid disk 🙂 3. It is easy to carry with you, prepare at one time, and install it multiple times. You can delete it at any time. There is a new version, just update the file. 4. This method is also applicable to card readers and mobile hard disks, especially mobile hard disks can greatly improve installation speed. 5. You can implement dual systems, or you can install it with a single system (formatting C drive when installing). This is determined by the option during installation. As long as the computer can be guided by USB, the installation is the best (comparable to the CD). Method: 1. Format the optical disk under Vista/Win7/2008, and set the U disk partition as a guide partition (this is the key to successfully guided installation!), "Computer" -> "Management" -> "Disk Management " -> point the best plate partition, right -click->" formatting "and" set as activity partition ". "Disk Management" cannot be operated with disk tool software. The traditional DiskPart method is not a necessary method. Because the command prompt operation is used, most people are not applicable. 2. Unzip the ISO image file of win7 into the U disk. The easiest thing is to use Winrar to directly decompress it into the super disk. Or use a virtual optical drive to load and copy it into the superfle. This is the production of the premium installation disk. 3. The computer is set as a prefabricated disk (the old computer USB -HDD is set to the first guidance. The new computer is preferred from the guidance hard disk, depending on the BIOS), and the exit is stored according to F10, and the computer can be installed normally step by step. 4. For the case where the capacity is insufficient: you can only decompress the key -boot files (refer to the hard disk installation method, including Bootmgr, BOOT, EFI folder, boot.wim under the source, about 200MB), and all the screens are reflected The inner file is decompressed to other partitions of the hard disk. After the boot is successfully booted with a super disk, select the computer repair mode, enter the DOS, and run the setup in the hard disk Win7 installation directory to install, but the installation will be more troublesome. Disadvantages: 1. The biggest disadvantage is that a super disk or mobile hard disk (believe that this is no longer a problem for most people). 2. A few computers cannot be guided by USB (I haven't encountered it anyway). In this case, I have to be honest and practical. 5、软件引导安装法（特定情况下可能安装不能成功） 简述：需要外部软件进行引导（见附件），没有32位/64位限制，可以单系统或多系统，可以纯系统干净安装，安装The process is simple. Methods: 1. Use the virtual optical drive to load the system ISO image to copy and install files or directly use WinRAR to decompress to the root directory of the hard disk non -system partition (not a folder!) 2. Download the attachment and run it, according to the old system environment selection mode 1 or 2 (Tip: If you finally install multiple systems, you need to uninstall the NT6 HDD Installer startup menu, which is best to uninstall in the old system). 3. Restart to select the NT6 HDD Installer and automatically enter the installation interface, and will not be detailed. Installed in other partitions into a double system, formatting C drive is a single system. NT6 HDD Installer V2.x two modes:
A. The difference between the safety and reliability of the two modes:
mode is GRUB4DOS, which does not rule out that a small number of machines are not compatible with GRUB4DOS; Microsoft 2 is Microsoft The self -guided method, the reliability theory of the installation interface of the system is 100%.
The source system when the source system is 2000/xp/2003, 1 adds a startup item than mode 2, but the proportion of the installation interface in the system is slightly lower than mode 2. Considering the preferredness from security, the current system is given priority. Use mode 1 for 2000/xp/2003. When Mode 1 cannot enter the installation interface, the use mode 2 is replaced.
Is when the source system is Vista/2008/Win7/2008R2, the starting item security of Mode 2, mode 1, the reliability of entering the system installation interface is higher than mode 1, so it is recommended to use mode 2
B B n B B . The difference in installation:
The operation mode 1 "Installation Mode 1" and "Declaining System Installation File to Root Directory" operations are not divided. When installation mode 2 You can "Installation Mode 2"
C.PE systems after the partition root directory:
The installation of NT6 HDD Installer V2.x in PE system cannot use mode Model 2, because there is no need to consider starting the security in PE, so in the future, the version does not intend to update the use mode 1 in PE. Installing this program in PE will not guarantee that the original hard disk of the original hard disk is not damaged. Therefore Installing this program in PE: (2008 is not the same as 2008r2, please note)*(The old and new systems include no 32 -bit and 64 -bit restrictions)
installation WIN7 or 2008R2 (system installation process exemption command prompt flock Operation)
. Virtual optical drive loads ISO or duplicate or ultraiso/winrar to decompress the ISO file to the root directory of the hard disk. This point is different from other hard disk installation methods
. Install NT6 HDD Installer
. After restarting the NT6 HDD Installer, it automatically enters the installation interface. The installation operation is the same as the CD. Format the C drive into a single system. As you need, the possible problems are listed below:
. As long as the operation is correct, the possibility of the occurrence is extremely small and does not affect the original system
. After the restart, there is no NT6 HDD Installer startup menu, unlikely, please feedback.
. After selecting the NT6 HDD Installer Mode 1 in the startup menu, you cannot enter the installation interface, prompting that you cannot find the source/setup.exe, check the position of the position of the WIN7 installation file, and confirm the partition format and mode of the partition 1 Not compatible, not affecting the original system, please install and use mode 2
. After selecting the NT6 HDD Installer Mode in the startup menu, there is no prompt black screen or automatic restart. Affects the original system, please install and use mode 2 and this program. The system installation process is common. By the way, the function of this program is mistaken for
NT6 HDD Installer. The failure after the installation interface is no longer related to the NT6 HDD Installer
. If you have used other hard disk installation methods (copy the boot folder to the C drive), please delete the copy of the BOOT folder of the C drive first before Installation, otherwise it may cause failure to complete the installation and fail, and the grid C disk is installed into a single system without deleting.
. After entering and installation, you cannot choose a disk formation. Prompt to load the driver. If you are installing Vista/2008, please check it yourself. It runs the disk formation: SourceSSETUP.EXE (correct) instead of running the disk form: setup. exe (error); if you are running without error or Win7/2008R2 (input -free command), please search for the motherboard chipset when installing the corresponding system. Set the hard disk compatibility mode, please solve it by yourself.
. Installing the blue screen/crashed in the middle, if the downloaded ISO is not damaged, check the hardware compatibility (remove the removable peripherals as much as possible).
. Four. Installed into a system, I did not find that the original C or the original C disk became D, Win7 turned into C, normal phenomenon, and the disk installation was the same. If necessary, you can add a disk formation to the hidden original C drive in disk management. Disadvantages: 1. External software. 2. The specific system environment/guidance environment may lead to guidance failure.
The Windows
7 hard disk installation method Daquan introduces Windows
7 to install high -version Windows
7, hard disk installation Windows
7 under Vista, Windows7 and other methods under the XP!
1. Windows
7 System newly install high version of Windows7:
1, download Windows7
7057
iso image (RC or RTM), use virtual optical drive to non -C drive ( Such as D: 7057)
2, power on F8 -repair system -select the last command repair -enter "D: 7057SourceSsetup.exe" in the command box " The interface, select CUSTOM installation
4, select the installation language, format the C drive
5, OK, and after the installation is a pure system (non -dual system).
. If there is a Vista installation disk, the method is also very simple:
1, download Windows7
7057
iso mirror (RC or RTM), copy it with virtual optical drive to non -C drive (such as D: 7057)
2, BIOS selects the optical drive start, enter the Vista installation interface
3, select the computer in the lower left corner (automatic search system, prompt loading the driver or closing, select the closure to enter the repair option)
4 1. Select the last command repair, enter "D: 7057Sourcessetup.exe" in the command box, start installing
5, select installation language, format C drive
(even if the C drive did not have no origin This method can also be feasible)
three, new installation of Windows
7:
1, download Windows R
705ISO mirror (RC or RTM), use virtual optical drive to copy to Non -C drive (such as D: 7057)
2, the bootmgr and boot directory in the D: 7057 directory (in fact, as long as the boot.sdi and BCD files inside) are copied to the CD -REG Create a source folder in the directory. (No administrator rights are required under XP)
3, copy the boot.win under the D: 7057Sources to the Sources folder built by the C -DDBD
4, run CMD as an administrator, and then enter C: OOT OOTSECT.EXE/NT60
C:
Tips (that is, success!)
5, turn off the CMD window to restart the computer, automatically enter the installation interface, select the installation language, and choose the time suitable for you The type of currency display and keyboard and input method
6, the "start installation interface" appears, (pay attention, do not click "now install") point to the lower left corner of "Repair
), enter" "系统恢复选择"，选择最后一项"命令提示符"()，进入DOS窗口rn7、输入“D:7057sourcessetup.exe“(不带引号)，开始安装rn8、选择安装语言、 Formatting C drive, it is OK
. The new installation of Windows7 under the Vista system (practice proves that XP is more convenient to use this method):
1, download Windows
7
7057iso mirror ( RC or RTM), copy with virtual optical drive to non -C drive (such as D: 7057)
2, copy the boot, EFI, Sources folder and BOOTMGR to the root directory of the C drive in the D: 7057 folder N3, copy D: 7057 OOT BOOTSECT.EXE to the root directory of C drive
The second part must obtain the administrator permissions
4, run CMD as the administrator, enter c: ootsect.exe/nt60
c: Enter the car (preferably copy, there is a space in the middle)
5, the restart system automatically enters the installation interface, and click the restoration of the computer in the lower left corner of the computer REPAIR
My
computer)
6,,,,,,,, Select the last command prompt, enter the DOS window, enter the d: 7057sourceSsetup.exe to the installation interface
7, select the installation language, format the C drive, it is OK
Download the virtual optical drive, don't say anything, Baidu search "virtual optical drive" will come out -then install the downloaded Win7 image to the virtual optical drive after installing it. You will see 2 optical drives on my computer. That is, I loaded the mirror image, go in to setup, and then wait for "install it now" and then select the disk to be installed.
You can reinstall the Win7 system with a U disk:
1. Make a startup disk. Download Lao Mao Tao, Chinese cabbage, installation of sisters, etc. (all free) U disk production software, install software, start, and make the startup disk according to the prompts.
2, download a Win7 Ghost file, put the downloaded Ghost file on the Ghost folder of the made U disk, and start the disk.
3, install the system with a U disk. Insert the U disk to open, press the F2 key to enter the BIOS, and set the setting from USB -F10-Y-Enter.
4, after entering the PE interface, select "Installation System".
5. After the installation is completed, unplug the U disk, the computer automatically restarts, click: start the computer from the local hard disk, continue to install.
6. After the installation is completed, restart. Power-enter BIOS-Set the computer to start from the hard disk -f10-y-return. In the future, the boot will start from the hard disk.
No need to be so troublesome, you first download a system mirror, ISO file, ISO file, and the Yuanjing forum to download, and then download a virtual optical drive. You can install
,
very simple simple